9
C - REMOTE CONTROL -
CONFIGURATION PARAMETERS
The configuration parameters should only be carried out with the receiver in the STAND-BY mode, using the keys 6, numbered from
1 to 6.
Key numbered 1 - By keeping it pressed for three seconds, the RF sensibility used for the search of radio stations in 15uV (maximum
sensibility) is selected. This is indicated by means of a flashing of the led and a beep.
This configuration is recommended when the module is installed in an area with bad radiofrequency reception.
In this way we make sure that the tuner receives the maximum number of radio stations as possible.
Key numbered 2 - By keeping it pressed for three seconds the RF sensibility used for the search of radio stations in 35uV (value pre-
defined in the factory). This is indicated by means of a flashing of the led and two beeps.
Key numbered 3 - By keeping it pressed for three seconds the RF sensibility used for the search of radio stations in 75uV. This is indi-
cated by means of a flashing of the led and three beeps.
Key numbered 4 - By keeping it pressed for three seconds the RF sensibility used for the search of radio stations in 300uV (minimum
sensibility, it will only receive local radio stations). This is indicated by means of a flashing of the led and four beeps.
Key numbered 5 - By keeping it pressed for three seconds the status of the receiver changes from Mono to Stereo. The default value
is stereo.
The mono mode is indicated by a flashing of the led and a beep, whilst the stereo mode is indicated by a flashing of the led and two
beeps.
Key numbered 6 - By keeping it pressed for three seconds the tuner frequency starts at the beginning of the FM frequency (87.50
MHz). This is indicated by a deep beep
