These characteristics are only given as reference. The manufacturer reserves the right to introduce any amendments without prior notice in order to improve the product.
P3262/63 -16-06-06
TECHNICAL CHARACTERISTICS
INSTALLATION EXAMPLES
SUPPLY:
Operation: 180-264 V AC / 50-60Hz for P3262
92-132 V AC / 60-60 Hz for P3263
Maximum power: 60 VA
Voutput: regulated between 16 V ± 5%
Ioutput: 4 A max.
Electronic protection against short circuits and overloads in the output.
Internal protection fuse of the power supply unit
GENERAL:
Maximum dimensions: 155 x 85 x 58 mm.
Weight: 350 grams.
In the Sonelco General Diagrams, you will find connection diagrams and recommended cable sections for the audio installation. Do not place this product
in damp places, close to heat sources or in potentially explosive atmospheres.
The connection to the electricity mains supply, installation, cable section, and wire laying will be done according to the specific directives and standards
of each country.
Sonelco recommends installing a specific general switch for the sound system. (See installation example).
Sonelco declines any responsibility that might be derived from the improper use of the product or installation that does not comply with the recommen-
dations
.
FIG. 1 – CENTRALISED INSTALLATION WITH 4 STEREO CHANNELS
FIG. 2 – CENTRALISED INSTALLATION WITH 2 STEREO
CHANNELS (ONE EXTERNAL C TUNER PC3666)
WITH TELECONTROL MODULE PC3810
FIG. 4 – CENTRALISED INSTALLATION WITH 2 STEREO CHANNELS
(ONE EXTERNAL CHANNEL
+
TUNER
PC3666)
WITH
DOMOTIC
CONTROLS
PCD1307
FIG. 3 – CENTRALISED INSTALLATION WITH 1 STEREO CHANNEL
CONNECTION OF LOCAL TUNER/CONTROL PC1271
CONNECTION OF DOMOTIC BUS
It replaces the control cables used in
other installations, for general inter-
com and by zones, messages, survei-
llance and remote scan.
It also transmits the frequencies of
each station from the tuner to the
domotic controls PCD1307.
INSTALLATION RECOMMENDATIONS
Por GERARDO fecha 9:02 , 16/06/2006
