BLUETOOTH KEYBOARD
– USER MANUAL
3
4
Establishing a connection with the meter
Before first use, please charge the keyboard (internal battery).
Fig. 1. Location of the pairing/connecting button
1.
Turn on the keyboard by sliding the
ON/OFF
switch to the
ON
position - after a while, the green
LED lights up for 5 seconds.
2.
Press and hold for a moment the "pairing/connecting" button
– the green LED will flash. The
keyboard will wait for the connection with the meter up to 10 minutes. Then the LED
stops flashing.
3.
Now the keyboard is in the pairing/connecting mode and it waits for the connection with the
meter - the details of how to proceed can be found in the meter
’s user manual.
If the battery is discharged, the green LED will blink fast.
5
Charging rechargeable battery
In order to charge the keyboard (internal battery), connect the keyboard to the USB port using
the cord supplied with the keyboard.
Charging is indicated by illumination of the red LED. When the device is fully charged, the LED
goes out.
pairing / connecting
