Specification:
FM
Frequency Scope………………………………. 87.5MHz -107.9MHz
Sensitivity…………………………………………………….. <26dB
AM
Frequency scope………………………………………….530-1710kHz
Sensitivity……………………………………………………..…<43dB
MP3
Sensitivity……………………………………………………… >35dB
Frequency……………………………………….(100Hz -10KHz)+6dB
Harmonic voltage distortion (1 KHz)………………………...….. <5%
Channel Separation…………………………………………….... >35%
Stereophonic reproduction channel balancing……………………...3dB
Maximum effective power……………………………………....25Wx4
Output rating……………………………………………………...3Wx4
Power source…………….… 12v (10.8-15.1V) DC negative pole earth
Speaker…………………………………………………………….4-8Ω
Button and Key Function
1. POWER
8. 4
2. CLK
9. 5/-10
3.
10. 6/+10
4.
11. BAND
5. 1/
12. MODE
6. 2/RPT
13. VOLUME
7. 3/RDM
14. RELEASE BUTTON
1
. POWER:
Switch on/off.
2
. CLK:
Clock button, press once then press again and hold it.
Once the time starts to flash you can use the volume knob to
adjust it.
3
.
: In radio mode to scan automatically(press). To find a
station manually(press and hold). In mp3 mode it will be the
“previous song” function.
4
.
:
In radio mode to scan automatically(press). To find a
station manually(press and hold). In mp3 mode it will be the
“next song” function.
5
. 1/
:
In radio mode this will be the preset 1 button. In mp3
mode it will be the pause function.
6
. 2/RPT:
In radio mode this will be the preset 2 button. In mp3
mode it will be the repeat function.
7
. 3/RDM:
In radio mode this will be the preset 3 button. In mp3
mode it will be the random function.
8
. 4:
In radio mode this will be the preset 4 button. In mp3 mode
this button does not have a function.
9.
5/-10:
In radio mode this will be the preset 5 button. In mp3
mode it will go back 10 songs.
10.
6/+10:
In radio mode this will be the preset 6 button. In mp3
mode it will go forwards 10 songs.
11.
BAND:
Press button to switch wave band, hold button for
AMS function.
12.
MODE:
Switches the mode.
13.
VOLUME CONTROL/SEL:
(1) Turn this button to change the volume.
(2) Each press will change the mode as follows:
Volume>Bass>Treble>Balance>Fader
(3) Hold down the button until LUD is displayed. Turn it to turn
the LOUD function on or off.
(4) Hold down the button until LUD shows then hold again until
EQ show to change the equalizer settings. They go as follows:
CLASS/POP/ROCK/JAZZ/EQ OFF
14.
RELEASE BUTTON:
Releases detachable panel.
Page 5
Page 6
