10
Product Registration
Sondigo User Forums
Firmware Upgrades
At the bottom of the Information tab is a link that allows you to register your Sirocco Wireless
Audio Bridge. Registering keeps you in the loop for product upgrades and information, and
helps the Sondigo team provide you with better support.
Sondigo has user forums where you can get support, learn more about Sirocco, and meet other
Sirocco users.
To check them out, head on down to
www.sondigo.com/forums
From time to time, new features and upgrades to your Sirocco may become available. To access
them, you will need to download a new firmware file and install it. Installing new firmware is a
very simple procedure, outlined in the steps below:
1)
Download the new firmware file (its name will probably end with “.bin”) from
www.sondigo.com and save it on your computer. Save it somewhere that’s easy to find,
like on the Desktop.
2)
Connect Sirocco to your computer with an Ethernet cable.
3)
Open the Sirocco Control Panel and click on the Setup Wizard button
4)
From the first page of the wizard, select “Upgrade Firmware” and press “Next”.
5)
Choose the device that you want to receive the firmware upgrade, and click “OK”
6)
Click the “Browse…” button in the next screen (shown below). You will be prompted to
find the location of the firmware file. Find it, click “Open”, and then click “Finish”.
7)
It will take a minute for the new firmware to load. When it’s finished, the Sirocco Control
Panel will open and your Sirocco will appear in a few seconds.
4
Support and Updates
