User manual
Lab Bench Series HPLC
Page 21
4 Handling
4.1 Unpacking
Make sure that there are at least two of you when unpacking the table to ensure that the table cannot
tip over or fall down the side of the ramp. Depending on the model, the table may exceed a weight
that can be safely held by one person alone.
0,8m
2,0m
If the table is delivered in a wooden box, please observe the following instructions.
The wooden box is equipped with an integrated loading ramp. Position the transport box on an even surface so that
there is sufficient space to fold down the ramp and roll out the table.
Open the box lock and fold down the loading wall. Release the parking brakes on the casters and carefully move the
table down the ramp.
4.2 Transport
Within buildings
Make sure that all wheel brakes are released and that the connecting cable is unplugged or long enough.
Especially with higher set-ups and / or with extended lifting columns, the table can become unstable or
even tip over during transport. If possible, move the table only in the lowest possible position and, if
necessary, secure the table and / or the equipment on top of the table against tilting.
The table has a low ground clearance of approx. 2cm in order to be able to occupy the lowest possible position. When
moving over for example a door thresholds, it may be necessary to lift the table slightly to avoid sitting on it.
Transport over longer distances
When transporting over longer distances, especially in vehicles, make sure that the table is secured against transport
damage. It is best to use the original packaging.
The table may only be transported over longer distances in the lowest possible position.
If the table is equipped with moving parts, such as drawers, these must be secured against slipping.
