SunBrite Solar Installation Guide
REMOTE CONTROLLER
REV: 21 0101 0000
TYPE
DATE
PROJECT
NOTES
www.sonarayled.com
®
©2021 | SONARAY LED LIGHTING HEADQUARTERS | 34 LAKEVIEW COURT VERONA, VA 24482 USA | OFFICE 844.202.5606 | FAX 540.242.7221
The battery in located in an easy access receptacle on the back of the
assembly. Remove the hardware and slide the old battery out. Make the
connections to the battery and re-attached the plastic cap.
Remote controller has six (6) settings to choose from. To program or re-
program the SunBrite Solar Assembly, simply point the remote controller
towards the sensor on the fixture and press the appropriate button.
• DEMO: Light turns on for one (1) minute then turns off for testing purposes.
• OFF: No matter the time of day or night, the light remains “OFF”.
• L: 12 hours 100% illuminance
• T: 4 hours 100% illuminance, 8 hours 30% illuminance
• M: 2 hours 100% illuminance with motion detected
30% illuminance without motion detected
2 hours 80% illuminance with motion detected
25% illuminance without motion detected
8 hours 70% illuminance with motion detected
20% illuminance without motion detected
• U: 4 hours 100% illuminance
8 hours 70% illuminance with motion detected
20% illuminance without motion detected
SITUATION
POSSIBLE REASON
POSSIBLE SOLUTION
LED
DOES NOT
LIGHT UP
Poor connection
Check wiring connections
No power to the luminaire
Recycle power or check power connection
Insufficient panel charge
Allow suffiencient charge
LED
FLICKER
Poor power connection
Check power connection
Input voltage fluctation
Confirm voltage
LIGHT TROUBLESHOOTING
SOLAR LIGHT CONTROLLER STATUS INDICATOR
INDICATOR LIGHT
STATUS
DESCRIPTION
YELLOW
(MOTION SENSOR)
On
Motion Detected
Off
Without Motion Detected
GREEN
(LED DIODES)
On
LED is ON
Off
LED is OFF
Flicker
LED short-circuit
BLUE
(BATTERY)
On
Battery sufficiently charged
Off
Battery charging
Flicker
Battery undervoltage
RED
(SOLAR PANEL)
On
Battery maximum charged
Off
Solar panel without output
Flicker
Solar panel is charging battery
CONTROLLER TROUBLESHOOTING
BATTERY REPLACEMENT
STRUCTURE SPECIFICATION
1. Solar Panel
2. Adjustable Panel Bracket
3. Lithium Battery
4. Cont Motion Sensor
5. LED Diodes
6. Lens
7. Battery Compartment
