212 Avenida Fabricante • San Clemente • CA • 92672-7531 • Tech Support (800) 582-0772 E-mail [email protected]
www.sonance.com
© 2002 Sonance. All rights reserved. 8.02
Specifications
Output Power, Stereo mode, RMS:
50 Watts per channel @ 8ohms
65 Watts per channel @ 4ohms
Total Harmonic Distortion:
0.2% 20Hz-20kHz @ 8ohms
1.0% 20Hz-20kHz @ 4ohms
B to A switchback delay:
3 to 90 seconds (variable)
Protection Circuits:
AC fuse, thermal, short circuit
Signal to Noise Ratio:
-100dB below rated output
(A-weighted)
Input Sensitivity:
300mv for 50 Watts @ 8ohms
Input Impedance:
47k ohms minimum
12VDC Outputs:
200ma maximum
Power Requirement:
120VAC, 50/60 Hz
Power Consumption:
360 Watts
Dimensions (W X H X D):
19 1/2” x 1 3/4” x 11 5/8”
(495mm x 45mm x 295mm)
RMF (1U):
19” x 1 3/4” x 11 5/8”
(483mm x 45mm x 295mm)
Consider these Sonance products when planning your system:
• Navigator
®
IR keypads and accessories for control
• Navigator Harbor for multi-source multi zone AV control
• AVC100, AVC100D and other Amplified Volume control Accessories
• MediaLinQ
®
and OptiLinQ
TM
to connect and control system electronics
• Sonamps for distributed audio amplification
• LS1 Balanced Audio Sender to transmit line level audio long distances
when used with LR1 module
