6
SUBWOOFER WIRE CONNECTION
The subwoofer features a dual voice coil driver with 4
wires, one pair for each of the amplifier channels. red
(+) and black (-) are used for the right channel, white
(+) and green (-) for the Left channel. The subwoofer
can be connected at any point along the daisy chain
e.g. beginning, middle, end or anywhere in-between.
However, locating the subwoofer mid-way in the daisy
chain will produce an equal amount of bass for the
speakers on either side of the sub. The subwoofer needs
to be connected in the same manner as the satellites
speakers (see figure 4).
IMPORTANT: THE SUBWOOFER HAS DUAL VOICE
COILS, ONE FOR THE LEFT CHANNEL AND ONE FOR
THE RIGHT CHANNEL, it is critical that the positive
and negative wires be connected correctly for both
channels. If either channel is connected incorrectly no
low frequency sound will be produced.
IMPORTANT: Be sure not to let any stray ’+’ and ’-’
strands touch each other. Touching strands will cause a
short-circuit which could damage your amplifier.
Turn your source and amplifier/reciever on and test the
system with your favorite music. If the speakers are
operating properly, refill the wire trench and enjoy your
new Sonance Patio Series System.
TO AMP
T
O THE NEXT SPEAKER
White
Wires
Red
Wires
Green
Wires
Left Channel
Right Channel
Black
Wires
Figure 4
Woofer (1 ea):
Satellite (4 ea):
Frequency Response:
Impedance:
Dispersion
Power Handling:
Sensitivity:
Enclosure Material:
Crossover:
Shipping Weight:
Satellite Dimensions:
Subwoofer Dimensions:
Included Accessories:
TECHNICAL SPECIFICATIONS
Sonance Patio Series System
1 ea - 8” (203mm) dual voice coil, polypropylene cone & Santoprene™ surround
4 ea - 3 1/2” (89mm) anodized aluminum cone & Santoprene™ surround
40Hz - 20kHz +/-3dB
8 ohms per channel nominal
60º dispersion with an optimum listening area 8’-20’ (2.4-6.1 meters) from the satellites
50 watts minimum; 150 watts system
85dB and 89dB SPL, satellite and subwoofer respectively, 2.83V / 1 meter
Satellites and Woofer - Non-corroding, high-heat ABS enclosures
100Hz
75 lbs (34kg) each
6.75” L x 4.53” Dia. (184mm x 115mm)
21.4” L x 12.4” Dia. (544mm x 315mm)
Four ground stakes, 12 silicone filled wire nuts
Satellites:
Woofer:
Listening Area:
Wire Recommendations:
Specifications subject to change. Direct burial cable required (sold separately).
CAD files available for download at www.sonance.com
8’-10’ (2.4-3 meters) apart along perimeter of listening area.
The center of the four satellites.
Up to 1000 square feet (93 square meters); may be expanded by adding Patio Series 4.1
System (Part #93429), ideal for areas up to 2,000 square feet (186 square meters)
18 gauge up to 100’ (33 meters) 4 conductor, stranded, direct burial
16 gauge up to 150’ (50 meters) 4 conductor, stranded, direct burial
14 gauge up to 250’ (80 meters) 4 conductor, stranded, direct burial
INSTALLATION BEST PRACTICE PLACEMENT RECOMMENDATIONS:
