background image

4

V 1.0

BEFORE YOU BEGIN

WELCOME

Congratulations on your purchase of the Sonance Navigator™
Network, and thank you for your selection of Sonance.  The
Navigator Network is the premier multi-source, multi-room
audio system in the industry.  It is designed to provide years of
care free operation.

Please take a few moments now to read these instructions thor-
oughly, so you may fully understand the sophisticated capabili-
ties of your new system.

ABOUT THIS DOCUMENT

This guide describes the process of installing the Sonance Navigator Network.  It provides both
a general overview of your new system and tips for simplifying your installation.

This document includes the following sections:

• The Sonance Navigator Network — Provides a description of the system and details its key 

components.

• Planning Your Installation —  Discusses preinstallation considerations, such as tools 

required, prewiring a building, and safety procedures.

• Installing the Navigator Network — Includes instructions for installing all components in 

the system

• Verifying Proper Installation — Provides troubleshooting steps for verifying system 

installation.

Summary of Contents for Navigator Harbor

































Reviews: