background image

©2017 Sonance. All rights reserved. Sonance and Architectural Series are registered trademarks of Dana Innovations. Due to continuous product improvement, 

all features and specifications are subject to change without notice. For the latest Sonance product specification information visit our website: www.sonance.com

 

SONANCE • 991 Calle Amanecer • San Clemente, CA 92673 USA • PHONE: (949) 492-7777 • FAX: (949) 361-5151 • Technical Support: (949) 492-7777

10.24.17

The BPS6 TL ships with a foam plug and tether inserted 

into the end of the port tube; 

remove and discard

Guide the port tube onto the 90 degree connector so 

the tube is positioned snugly in place. Tighten the clamp 

ring to secure the port tube.

(See Figure 5).
Attach the mounting platform to the stud or joist. 

For mounting platform installation details visit 

www.sonance.com/in-wall-in-ceiling/

architectural-series/bps6-tl.  

BPS6 TL QUICKSTART GUIDE

 

FOR USE WITH ARCHITECTURAL SERIES BANDPASS CONNECTORS

Attach the 

four conductor speaker wire

 to the input 

terminals; positive wires to red terminals and negative 

wires to black terminals. Run a signal test using an 

amplified program material for at least 60 seconds. 

Secure the speaker wire to the zip tie attached to the 

subwoofer cabinet to prevent accidental removal.

(See Figure 6).

For more eManuals and diagrams visit 

www.sonance.com/in-wall-in-ceiling/bps6-tl

     

33-7939

5

LEFT

BPS6TL

RIGHT

MADE IN CHINA

6

Included 

zip tie 

for wire

Figure 5

Figure 6

Reviews: