11
EN -Functions / H - Funkciók / SK - Funkcie / RO - Funcții / SRB-MNE - Funkcije / CZ - Funkce /
HR-BIH - Funkcije
BATHROOM SCALE
MEASURING
• It is recommended to do the measuring every day at the same time of the day, preferably before breakfast.
• Place the device to a flat, smooth, hard surface. Do not place on carpet or other soft surface, because the measured weight can be
incorrect.
• Press the „SET” button, and wait till the „0.0” value appears on the display.
• Stand up straight on the scale by placing one leg slowly on it first, then the other.
• Stand there for a few seconds, till the measured weight starts flashing first, then it will be displayed continuously indicated.
• After the measuring is completed, the unit will switch off automatically after a few seconds.
USER INFORMATION
• The scale is suitable for measuring body fat and body water percentage. For the usage you have to provide the following data: your age,
height and sex. The scale is able to store the data of 10 users at the same time.
Follow the steps, written below:
• Press the SET button and wait, till the „0.0” value appears on the display. Press the „SET” button again, and one of the programmed
memories 01 – 10 will be displayed. Furthermore an icon of man or a woman and „USER” label will be visible on the display. After this, by
using „ „ or „ „ buttons, step the memory position, while the „01” appears on the display. After entering the data of first person, press
the „SET” button to fix it in the memory. The icon of a man or a woman will start flashing on the display.
• You can increase or decrease the age with the same „ „ or „ „ buttons, and fix it with “SET” button. After that the value of height starts
flashing in centimetre (cm), feet, or inch, depending on the previously pre-set measuring unit: kg (kilogram), lb (font), or st:lb (stone:font).
• In case the data of first person has been recorded, wait till “0,0” value appears on the display, and the scale turn off.
• Repeat this procedure with all users, who will use the scale.
WEIGHING, MEASURING BODY WATER AND BODY FAT PERCENTAGE
• After you had entered all required data to the memory, follow the steps below to measure body water and body fat percentage.
• Briefly press the “SET” button, and wait till the „0.0” value appears on the display. Press the „SET” button again, then choose the number
which belongs to you with „ „ or „ „ buttons. Wait till the “0.0” appears again on the display.
• Stand up on the scale and don’t move. First your weight will be indicated flashing on the display. Wait for a few seconds. After the body
fat will be visible next to symbol, together with one of the following remarks:
● UNDERFAT (skinny)
● HEALTHY
● OVERFAT
● OBESE
• Following that, the percent of body water will be visible next to
symbol. The two measured percentage and the weight will appear
on the display alternately, and the scale will switch off after a few seconds. You can find below a table about the body fat and body water
percentages for your information.
• The table of body water and body fat percentages is based on general parameters, and the values will be displayed following the meas
-
ured weight and the entered data.
Body fat %
Age (year)
Female
Male
Skinny
Healthy
Overfat
Obese
Skinny
Healthy
Overfat
Obese
12-20
<18
18-28
28-33
>33
<15
15-21
21-26
>26
21-42
<20
20-30
30-35
>35
<17
17-23
23-28
>28
43-65
<21
21-32
31-36
>36
<18
18-24
24-26
>29
66-100
<22
22-32
32-37
>37
<19
19-25
25-30
>30