5
30. If you notice any abnormality (e.g. unusual noise from the appliance or a burning smell), switch it off and
unplug it immediately.
31. Make sure that no objects or liquids can enter the appliance through the openings.
32. To reduce the risk of electric shock, do not expose this appliance to dripping or splashing water, and do not
place objects filled with liquids, such as vases on the appliance.
33. Do not place an open flame source, such as a burning candle on the appliance.
34. Protect from dust, humidity, sunlight and direct heat radiation!
35. Power off the appliance by unplugging it from the electric outlet before cleaning!
36. Do not touch the appliance or the power cable with wet hands!
37. The appliance may only be connected to properly grounded 230 V ~ / 50 Hz electric wall outlets! The circuit
must be protected by a 16 A circuit breaker.
38. Unwind the power cable completely!
39. Do not use extension cords or power strips to connect the appliance!
40. Do not lead the power cable on the appliance, or near the air inlet and outlet openings!
41. Do not lead the power cable under carpets, doormats, etc.!
42. The appliance should be located so as to allow easy access and removal of the power plug!
43. Lead the power cable so as to prevent it from being pulled out accidentally or tripped over.
44. The appliance is intended for household use. No industrial use is permitted!
45. Due to continuous improvements, the technical data and design may change without any prior notice.
46. The actual instruction manual can be downloaded from www.somogyi.hu website.
47. We don’t take the responsibility for printing errors which may occur, and apologize for them.
CAUTION: RISK OF ELECTRIC SHOCK!
Do not attempt to disassemble of modify the unit or its accessories. In case any part is damaged,
immediately power off the unit and seek the assistance of a specialist.
In the event that the power cable should become damaged, it should only be replaced by the manufacturer,
its service facility or similarly qualified personnel.
Do not cover!
Covering the unit can cause overheating, fire or electric shock!
ASSEMBLY AND INSTALLATION OF THE UNIT
1. Before installation, carefully remove packaging, and make sure not to damage the unit or the connecting cable.
If you find any damage, the unit must not be operated!
2. Take out the unit from the box.
3. To ensure proper operation, you have to arrange for the free circulation of hot air. Therefore, please, observe
the minimum clearances indicated in
Figure 2.
4. Review
Figure 3
and make holes in the wall appropriate to the size of the dowels you want to use, or the ones
supplied. The holes should be located at a distance of 500 mm horizontally and 740 mm vertically from each other.
5. Fix the wall mounted part of the supplied 4 bracket pairs (7) to the wall. When installing, take care that the
screw hole on the side of the wall mounted bracket must align with the slot cut in the side of the bracket mounted
on the unit.
6. Fix the other members of the bracket pairs to the back of the appliance using the supplied screws (8). When
fixing, take care that the slots on the side of the brackets mounted on the unit must align with the screw holes on
the side of the wall bracket.
7. Attach the unit to the wall, then secure the brackets with 1 screw each. If necessary, you can position the wall
mounted product by gently loosening these screws.
8. Plug the unit into a standard grounded wall socket. Now the unit is ready for operation!
