touch buttons (14.) of the appliance, you can set the desired temperature to reach
from 15 to 35 °C
. If the room temperature exceeds the set temperature by 1 °C,
the appliance heats no longer. The appliance switches on again when the room temperature drops 3 °C below the set value.
Heating stages
can be selected with
buttons. The low stage (500 W) is indicated with mark, while the high stage (1000 W) is indicated with mark on the display. With the help of the button, or the
temperature adjusting arrows (14.) you can set the
remaining operational time
by hour, even up to 24 hours.
Child lock
function can be switched on or off with child
lock (13.) button of the appliance by holding it for 3 seconds. In case of
power cut
or after switching off with the main switch, all settings, including child lock will be
deleted. After switching on, the default thermostat temperature is 30 °C. By switching off with button, the setting of the thermostat and heating stage remains, and
the shutdown timer counts back as well!
With smartphone application. The mobile phone needs to be connected to internet.
1.
Scan the QR code (
6. figure
) with you smart phone then download and install "Tuya Smart" application.
2.
Select the country dialing number, enter your mobile phone number and press the "Get" button.
3.
Enter the "Verification code" you got in SMS and enter the password you want to use in the application, which should consist of numbers and letters.
4.
Login to the application: „Login”
5.
Make sure your appliance and smartphone are as close as possible to the wifi router and both are connected to it.
6.
Add the new appliance to the program by pressing the "+" button.
•
Select the appliance type: "Heater".
•
Press the "Finish network configuration" button.
• Press and hold the button for more than 5 seconds until the beep sound
• Tick the check box, and press „Next: Connect appliance with Wi-Fi” button
• Enter the Wi-Fi password, and press the „Confirm” button.
• Press and hold the button for more than 5 seconds until the beep sound.
The appliance is connecting the cloud based application.
7. If the connection under the 6. point was not successful, "Failed to add" is displayed.
• Choose the lower „Add appliance with other methods” possibility.
• Press and hold the button for more than 5 seconds until the beep sound.
• Press the „Finish network configuration” button.
• Tick the check box, and press „Next: Connect appliance with Wi-Fi” button
• Enter the Wi-Fi password, and press the „Confirm” button.
• On the appearing „Connect phone to appliance’s wifi hotspot” screen, choose the „Connect now” option.
• Press and hold the button for more than 5 seconds until the beep sound, until the WLAN network shows up the „SmartLife-XXXX” network. Choose this for
the connection. If the status is „Connected”, then press the step back button on the mobile.
• The „Connecting now” screen runs down, and the appliance is connected to the cloud based application.
8. In the application, you can see the room temperature, you can switch on/off the appliance, you can choose low (Low) or high (High) heating stage, you can
switch the child lock on/off, you can set switch off timing, and you can set the exact times and dates for switching the appliance on and off.
In the event of overheating, the
overheating protection function
will switch off the appliance, for example when the air inlets and outlets are covered. Power off the
appliance by unplugging it from the electric outlet. Allow the appliance to cool (for at least 30 minutes). Check whether the air inlets and outlets are obstructed or not,
and clean them if necessary. Install the appliance again. If the overheating protection activates again, power off the appliance by unplugging it from the electric outlet
and contact the service facility.
CLEANING & MAINTENANCE
In order to ensure optimum functioning, the appliance may require cleaning at least once a month, depending on the manner of use and degree of contamination.
1.
Switch off and power off the appliance by unplugging it from the electric outlet before cleaning.
2.
Allow the appliance to cool down (for at least 30 minutes).
3.
Clean the protective grill using a vacuum cleaner equipped with a brush accessory.
4.
Use a slightly moistened cloth to clean the appliance's outer surface. Do not use any aggressive cleaners. Avoid getting water inside of and on the electric
components of the appliance!
TROUBLESHOOTING
Waste equipment must be collected and disposed separately from household waste because it may contain components hazardous to the environment
or health. Used or waste equipment may be dropped off free of charge at the point of sale, or at any distributor which sells equipment of identical nature
and function. Dispose of the product at a facility specializing in the collection of electronic waste. By doing so, you will protect the environment as well as
the health of others and yourself. If you have any questions, contact the local waste management organization. We shall undertake the tasks pertinent to
the manufacturer as prescribed in the relevant regulations and shall bear any associated costs arising.
SIMPLIFIED EU DECLARATION OF CONFORMITY
Somogyi Elektronic Ltd. certifies that the FK 410 WIFI
radio equipment
complies with the 2014/53 / EU directive. Full text of EU Certification of Conformity is available
at the following link: [email protected]
SPECIFICATIONS
power supply: . . . . . . . . . . . . . . . . . . . . 230 V~ / 50 Hz
output:. . . . . . . . . . . . . . . . . . . . . . . . . . 500 W / 1000 W
maximum output:. . . . . . . . . . . . . . . . . . 1000 W
IP protection: . . . . . . . . . . . . . . . . . . . . . IPX4: Protected against splashing water, from every directions!
dimensions of heater:
standing on floor:. . . . . . . . . . . . . . . . . . 60 x 43 x 24 cm
mounted on wall: . . . . . . . . . . . . . . . . . . 60 x 38 x 9 cm
transmission frequency/output:. . . . . . . . 2,4 GHz / 1 mW
weight: . . . . . . . . . . . . . . . . . . . . . . . . . 4,8 kg
length of power cable: . . . . . . . . . . . . . . 1,5 m
Solution
Check the power supply
.
Check the thermostat setting
s.
The overheating protection may activated.
Clean the appliance
.
Malfunction
The unit
doesn't work
in heating stages.
The overheating protection activates frequently
.
