Somnox Sleep Robot 2 Full Manual Download Page 23

23

Certification

This marking indicates that this product should not be disposed with other household wastes throughout the EU.
To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it
responsibly to promote the sustainable reuse of material resources. To return your used device, please use the
return and collection systems or contact the retailer where the product was purchased. They can take this product
for environmental safe recycling.

Hereby, Somnox B.V. declares that the radio equipment type Somnox 2 Sleep Robot is in compliance with Directive
2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address:
www.somnoxsupport.com/certification.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15
of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a
residential installation.

This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one of the following measures:

Reorient or relocate the device.

Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.

Contact Somnox for help.

To assure continued compliance, any changes or modifications not expressly approved by the party responsible
for compliance could void the user's authority to operate this equipment.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

This device may not cause harmful interference, and

This device must accept any interference received, including interference that may cause
undesired operation.

This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. SAR has
been evaluated with a laptop as host and the maximum SAR value reported is 0.30 W/kg. This transmitter must not
be co-located or operating in conjunction with any other antenna or transmitter.

This equipment marketed in USA is restricted by firmware to only operate on 2.4 GHz channel 1-11

This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following
two conditions:

1)

this device may not cause interference and

2)

this device must accept any interference, including interference that may cause undesired

operation of the device

To prevent radio interference to the licensed service, this device is intended to be operated indoors and away from
windows to provide maximum shielding.

Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence.
L'exploitation est autorisée aux deux conditions suivantes :

1)

l'appareil ne doit pas produire de brouillage, et

2)

l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage
est susceptible d'en compromettre le fonctionnement.

Summary of Contents for Sleep Robot 2

























Reviews: