Sommer GmbH
33
9. Appendix
9.1. No internal Bluetooth adapter found
If this message is displayed after clicking on
Measurement (F9)
there are two possible reasons:
o
There is no internal Bluetooth Radio available.
o
The internal Bluetooth Radio is deactivated (hardware switch, FN-shortcut; please refer to the laptop
manual).
In both cases Sommer Messtechnik suggests using the supplied Class 1 Bluetooth dongle with a range of
up to 100 meters.
Plug in the supplied Bluetooth dongle in an available USB port and wait until the automatic installation
process is completed.
o
Again click
Measurement (F9)
Attention:
Please note that the internal Bluetooth module must not be active when
new measurements are performed to ensure that the supplied BT dongle
is used for establishing the connection with the TQ-Amp (see chapter 0).
9.2. Optimizing the Bluetooth range
Under the following conditions a Bluetooth range of up to 100 m can be achieved:
o
Bluetooth needs a clear line of sight! Consider any obstacles between the laptop and the TQ-Amps.
o
The connection is established with the supplied class 1 Bluetooth dongle. For information on how to
(permanently) enable the Bluetooth dongle please refer to chapter 9.3.
o
Position the TQ-Amp perpendicular to the line of sight.
Attention:
Please note that the internal Bluetooth module must not be active when new
measurements are performed to ensure that the supplied BT dongle is used for
establishing the connection with the TQ-Amp (see chapter 0).
