Installation guide
z
Copyright © 2010 - 2011 Somfy SAS. All rights reserved.
Sunis indoor WireFree™ RTS
EN
NPress and hold the (PROG) button on
the already assigned RTS control point
[XJB JZ: :XK@]K[8J M:7 H8 HXK
forth: the motor or RTS receiver RTS
enters programming mode for 2 minutes.
4) ]B: @]:77 JZ: Vj [JJX X JZ:
Sunis Indoor WireFree™ RTS. The
:XK@]K[8J M:7 H8 HXK ]JZ JZ:
Sunis Indoor WireFree™ RTS is
programmed.
j:@:HJ @:]HJBX7 N HXK ] :H8Z JZ: :XK@]K[8J7 J :
assigned to this sensor.
?W###J<!"#V$%&#%'%()!
Clean the surface on which the sensor is to be mounted.
Z:8JZHJJZ:]:B7XJZBXYJZHJ8HX8H7JH7ZHK6XJZ:7:X7]-
5.3.1. On an inside window sill
1) Screw the suction cup to the bottom of the
sensor (A).
2) Moisten the suction cup.
NPosition the sensor with the sunlight intensity
detection area (B) towards the exterior and
@]:77XJZ:7:X7]JGBJBX@H8:-
A
B