To delete all previous settings:
Using a paper clip, press and hold the PROGRAM button located
on the motor head. The LED will light then blink; release the button when the LED turns off. If you
cannot see the LED, push the programming button for 15 seconds, and then release the button. All
transmitters and limits will be erased. (Motor is now reset to factory mode). Motor limits will need to
be reestablished.
Program
Button
To delete all previous settings:
press and hold the
PROGRAM button
(approximately 15 seconds)
until the LED blinks rapidly then extinguishes.
All transmitters and limits will be erased. (Motor is now reset to factory mode). Motor limits will need to
be reestablished.
TM
Resetting WIREFREE CORD LIFT MOTORS CT-32
TM
Resetting WIREFREE ROLL UP MOTORS lt-30rt Round Head
Insert reset tool into
connector on motor.
Adding or deleting a Transmitter or a Channel
STEP 3:
STEP 4:
Select the transmitter (single channel) or
the channel, (1-5) of a multi-channel
transmitter, to be added or deleted.
Press and hold the programming button
of that transmitter until the motor
jogs.
STEP 1:
STEP 2:
Using already programmed transmitters
select the transmitter (single channel) or
the channel, (1-5) of a multi-channel
transmitter.
Press and hold the programming button
of that transmitter until the motor
jogs.
P
r
m
d
ro
g
a
m
e
Tr
a
s
t
n
m
it
re
T
s
i
t
r
a
n
m
t
er
o
a
d
o
T
d
r
D
e
el
te
© SOMFY ULC 05/07
Program
Button
1-800-22SOMFY