8
Copyright © 2013 Somfy SAS. All rights reserved - V1 - 02/2013
2.4. TIPS aNd RECoMMENdaTIoNS FoR INSTaLLaTIoN
2.4.1. questions about the Tilt & Lift 25 RTS Central?
To press on the motor PRog button, it’s best to use the motor antenna. The
use of other tools could damage the PRog button.
2.4.2. Re-setting the end limits
Readjusting the upper end limit
1) Press the
Up
button to bring the
motorised product to the end limit to be
readjusted.
2) Press the
Up
and
down
buttons at the
same time until the motorised product moves
up and down.
3) Press the
Up
or
down
button to move
the motorised product to the new desired
position.
4) To confirm the new end limit, press the
my
button until the motorised product moves up and down.
1
2
3
4
Observations
Possible causes
Solutions
The motorised
product does not
operate.
There may be some radio
interferences.
Unplug the motor supply cable
and reconnect the battery tube to
the motor.
One or more batteries have been
mounted backwards.
Verify that batteries are all
mounted in the correct manner.
One or more batteries leak in the
battery tube.
Replace the batteries
Batteries (inside battery tube) are
weak.
Check whether the batteries are
weak and replace if necessary.
The control point battery is weak. Check whether the battery is
weak and replace it if necessary.
The control point is not
compatible.
Check for compatibility and
replace the control point if
necessary.
The control point used has not
been programmed into the motor.
Use a programmed control point
or program this control point.
