NOTE: Wind sensor is factory set and does not require activation.
1.
Press and hold the Sun/Wind
Selector Button.
2.
The light will change sides and the
shade will jog. When the left side is lit,
the shade or awning will only react to
wind control. When the right side is lit,
the shade or awning will react to both
sun and wind control.
Sun/Wind
Selector
Wind-only
Sun &
Wind
© Copyright Somfy Systems, Inc. 1/2010
NOTE: IN CASE OF A LOST TRANSMITTER, PROFESSIONAL PROGRAMMING ASSISTANCE IS REQUIRED.
PLEASE CONTACT SOMFY AT [email protected] OR YOUR LOCAL DEALER
AT www.somfysystems.com/locatedealer.
REPLACING THE BATTERY
1.
Using a small screwdriver loosen the
screws on the reverse side of the remote
control and remove the back cover.
2.
Replace the battery with one
2430 Lithium 3V battery.
ACTIVATING SUN MODE: REQUIRES OPTIONAL SUN AND/OR WIND SENSOR
Sun/Wind
Selector
C - 0003
my
2.
To lower your window shade or
extend your awning, simply press
the down ( ) button.
3.
If you want to stop your shade or
awning while it is moving, press the
center ( ) button.
PAGE 2 REV 3
OPERATING
1.
To raise your window shade or
retract your awning, simply
press the up ( ) button.
