SOMFY TaHoma +, Installation Manual

Page: 11 / 76

11
Copyright © 2016 Somfy SAS. All rights reserved.
EN
Configuration
To use the opening and shock detector in the various settings
previously mentioned, use the following configurations.
Activation / Deactivation of magnet
The mode selector indicates the activation/deactivation of
the magnet.
For Connected Security (TaHoma
®
serenity
):
• Opening detection
For solutions A or B, put the mode selector in the
Magnet activated position (default position). The
opening and shock detector is now operational.
For solution C, place the selector in the "Magnet
not activated" position, then carry out the opening
programming (see p12).
This step enables the unit to recognise opening or closing of the
window or door without requiring the magnet.
• Shock detection
For solution A, set the mode selector to the
"Magnet activated" position (default position), the
proceed to the shock "learning" mode (see p12).
This step enables the unit to recognise intrusion attempts.
C P
C P
C P
C P
C P
C P
Magnet activated
(Default position)
Magnet deactivated
C P
C P
C P
C P
C P
C P
C P
C P
C P