background image

Sonesse 30  Programming & Operation Instructions

STEP FOUR

Setting Limits (Shade Positions)

1.

2.

my

Press & hold MY (stop)
Button

3.

4.

my

Press & hold MY (stop) 
and UP Button

my

Press & hold MY (stop)
and DOWN Button

Starting with shade in down position.

      

   

    4) Once desired upper limit (shade position) is reached, press and

           hold the 

MY (stop)

 and 

DOWN  uttons

 simultaneously until the 

           shade begins to move down, then release.

b

 3) Press the 

MY (stop)  utton

 when the shade reaches the desired 

      upper limit (shade position). If necessary, adjust the desired
      shade position with a brief press of either the 

UP or DOWN  utton

.

b

b

      2 ) Once the desired lower limit (shade position) is reached, press and hold 
           the 

MY (stop)

 and 

UP  uttons

 simultaneously until the 

           shade begins to move up, then release.

b

my

Press & 
hold UP 

or

 DOWN 

Button

my

Press & 
hold DOWN 
Button

Press & 
hold UP 
Button

Check Polarity (Shade direction)   MUST BE DETERMINED BEFORE SETTING SHADE LIMITS

STEP THREE

my

my

Press and hold the 

DOWN

 

utton

 and confirm the shade moves down.  

Press and hold the 

UP  utton

 and confirm the shade moves up.

              ·If shade direction is correct, continue to 

Step 4.

              ·If shade direction is not correct (in reverse), press and hold the 
               

MY (stop)  utton

 on the transmitter for 2 seconds.  Shade will jog.  

               Shade direction is now corrected.  Shade movement should now 
               correspond to the direction button on the transmitter.

b

b

b

TM

      

 1) Press and hold the 

UP or DOWN  utton

 on the transmitter to 

          reach the desired lower limit (shade position).

b

 P.2

Solar Control, LLC   |   888-550-4836

SolarControlLLC.com

Summary of Contents for Sonesse 30








Reviews: