background image

8

Copyright © 2017 

SOMFY ACTIVITES SA

. All rights reserved

EN

SONESSE 30 WF RTS LI-ION

2. 4. 5. Erasing control points (transmitters) from memory

To  delete  all  the  programmed  transmitters,  press  and 
hold the motor head programming button until the driven 
product  briefly  moves  Up  and  Down  twice.  All 
programmed control points (transmitters) are deleted.

2. 4. 6. Erasing the memory of the motor (factory default)

To  reset  the  motor,  press  and  hold  the  motor  head 
programming  button  until  the  driven  product  briefly 
moves Up and Down 3 times.
All the settings are erased.

2. 4. 7. Sleeping mode

1

The driven product must be programmed.

This feature temporarily prevents the drive product from responding to any previously programmed control 

points (transmitter) commands.

1)  Press and hold the motor head programming button 

until the driven product briefly moves Up and Down.

2)  Briefly press the motor head programming button, 

the  driven  product  briefly  moves  Up  and  Down 
twice. “Sleeping mode” is activated.

3)  To deactivate the “Sleeping mode”, briefly press the 

motor head programming button. The driven product 
briefly  moves  Up  and  Down,  the  control  point 
(transmitter) commands are enabled.

2x

3x

2

3

1

2x

Summary of Contents for SONESSE 30 WF RTS LI-ION













Reviews: