44
Smoov
e Uno io
Smoove Uno io
Smoov
e Uno io
Smoove Uno io
Programming
Use the UP button to move the
application in the upper end limit
Press again briefly on the UP and
DOWN buttons, the application goes to
his down end limit
Press > 5 s simultaneous on the
UP and DOWN buttons till a short
movement of the application
When the down end limit is
reached, press immediately on
the MY (stop) button
Press the PROG
button until the LED
lights up green
Follow the instructions
on the screen
...short movement
of the application
Transmitters
without feedback
Transmitters with
feedback
1 Set the running time
(The end limits of the motor must be set upfront)
2 Program or delete the transmitter
This procedure can only be carried out
within 30 s
of the appliance being switched on or after inserted
the electronic module into the Smoove Uno io
5 s
➞
➞
A
B
Briefly press the PROG button
until...
<1 s
<1 s
Back of the
Smoove
Back of the Situo
Nina io