Programming
Channel Selection
Before operating the Situo 5 RTS, ensure the correct
channel has been selected.
• Press the channel selector button (F) to choose
the correct channel.
• The selection indicator lights (E) correspond
to channel 1 through 4. Channel 5 is selected
when all indicators lights are on.
Adding/Deleting a Situo 1 or 5 RTS
To add or delete from a window covering:
On the Situo 1 already paired with the window covering:
• Press and hold the PROG button (G) until the window
covering moves up and down. This step may require a paperclip
because the button is recessed.
On the Situo 5 RTS to be added or deleted:
• Select the channel (F).
• Briefly press the PROG button (G), the window covering
moves up and down and the Situo 5 RTS is added or deleted.
Setting Up a Replacement Remote
1. Reset motor from motor head (motor will jog to confirm).
2. On the Situo remote, Press UP & DOWN.
3. Next, Press "my" and DOWN to set lower limit. Move motor to the desired limit position.
4. Then, Press "my" and UP to set upper limit. Move motor to the desired limit position.
5. Now, PRESS & HOLD "my" Button to confirm limit settings (motor will jog once).
6. Finally, on the back of the Situo Remote, PRESS and HOLD "Programming Button" until the motor jogs again.
Your Situo remote is not programmed and can control your RTS shade. Use the UP and DOWN buttons to confirm.
7. Repeat steps again if motor limits are not properly set.
1
2
3
4
5
E
F
Situo 5 RTS
F
G
Continued On Next Page