48
Stopper
Setting up of upper and lower limit
stop at the factory, fine adjustment on
site possible
assembly and
disassembly of
the tube
Positioning the blind tube in the sup-
port:
1. first, position the tube in the
corresponding support.
2. Press the opposite side with the
attached clip into the round pin and
engage it.
3. Carry out fine adjustment if
necessary.
4. Place the cover on to the support
Size of system
maximum width of 200 cm
maximum height of 300 cm
fabric reeling
Standard backward reeling,
forward reeling upon inquiry
fabric width
Roller blind width: ./. 3,4 cm
ROLLECTRIC II
TEChNIquE mOTOR 24 V
Width of the roller blind system
Fabric width
approx. 12 mm
approx. 22 mm
