9
Page
© by Somfy GmbH
2 Installation
Using the adjusting screw (1), the antenne can be turned
in an angle of 180° for optimum positioning. Reception
occurs when the LED control light (2) blinks once per
second (in the 59th second blinking will stop once).
Note:
The antenna for DCF reception of date
and time is situated in the housing under
the chip.
1
2
• Close the housing by bringing the top part of the
housing over the base.
The top part must click in with a clear “click“ sound.
• Move the Weather Station from above in the mounted
holder.
The edged peg sides of the holder must click in to
the grooves of the housing
The Weather Station can be taken off the holder by
pushing it upwards carefully against the resistance of the
grooves.
3 Servicing the Weather Station
The Weather Station should be checked regularly twice a year for dirt and cleaned
when necessary. When the wind sensor is subject to a lot of dirt it may malfunction by
recognising a continuous rain message or that there is no more sunshine.
Attention: When servicing the Weather Station and damage is identi-
fi ed, it must be taken out of operation.
2.3 Positioning of the DCF antenna
2.4 Mounting the Weather Station
Groove
Groove
