SOMFY nina Instruction Manual Download Page 22

Page: 22 / 61

Non contractual pictures

SUMMARY

WELCOME PAGE

1. SAFETY

2. NINA IO REMOTE CONTROL

3. USE NINA IO

Control an item of equipment

My function

Natural Control function

Customize remote control

5. ADVANCED SETTINGS

6. TROUBLESHOOTING

7. ABOUT NINA IO

Load a scenario

• Select a room/group

1. Select the Groups menu by clicking on the

corresponding icon.

2. Select the room or the group containing

the equipment to control by clicking on the

corresponding icon.

All rooms and groups are available using

the navigation buttons or the swipe.

> The available scenarios for the control of the

selected room/group are displayed.

• Launch the scenario

Select the scenario by clicking on the

corresponding icon or name.

4. The action starts once the button is released:

> A wheel and a Stop button are displayed when

the action is ongoing (A). Click on this button

to stop the action at any time.

> A checkmark is displayed for few seconds when the action is achieved (B).

If a problem occurs, the detected default is displayed and it is possible to start again the

launching of the scenario.

• Scenarios defined by default at installation:

Open / Close

Open/Close all

Switch ON /OFF

Summary of Contents for nina






























































Search results

Summary of Contents for nina

Reviews:

Related manuals for nina

Brands by name

Popular brands

SOMFY nina, Instruction Manual

Search results

Summary of Contents for nina

Reviews:

Related manuals for nina

Brands by name

Popular brands