98
CONTENTS
2. NINA TIMER IO REMOTE CONTROL 5
3. USING NINA TIMER IO
Copyright © 2017 - 2021 SOMFY ACTIVITÉS SA, Société Anonyme. All rights reserved.
First installation of Nina Timer io
After you have paired the items of equipment, place them in groups/rooms, following the steps indicated by Nina
Timer io. The detected items of equipment are displayed one by one on the remote control, in order to be placed
in predefined groups.
25 predefined groups are available and 5 new groups can be created.
After the installation, only the groups containing equipment are available for utilisation in the
Groups
menu.
• Click on
to locate the item of equipment in the installation: the corresponding item of equipment will be
triggered to be easily spotted. When the item of equipment is located, click on
to stop its movement.
• Click on
to delete the displayed item of equipment.
• If required, specify the equipment profile by selecting one of the displayed options.
Place equipment in groups/rooms
1. For every displayed item of equipment, click on
Place equipment in groups/rooms
.
> The group list is displayed.
2. Select a group by ticking the corresponding box
then click on
OK
to validate.
You can select one or more groups for
a same item of equipment by selecting one or
more tick boxes.
> The group(s) associated with the item of
equipment are listed.
3. Click on
OK
to save.
To customize items of equipment, see
Customize items of equipment, page 68
1
2
3