background image

72

© 2011 Somfy SAS. All rights reserved. 06/2011

En 

6. OPERAtIng

6.1. Standard operation

To use the favourite (my) position: Briefly press the "my" 

button: the E.V.B. starts to move, then stops and angles 

the slats in accordance with the angle programmed for the 

favourite (my) position.

6.1.2. StOP function

The E.V.B. is moving.
Briefly press the "my" button: the E.V.B. stops 

automatically.

6.1.1. Favourite position (my)

Besides the upper and lower positions, an intermediate position known as the "favourite 

position (my)" may be programmed in the motor. the “my” favourite position is pre-set in the 

factory, and corresponds to the “slats lowered, sun protection” position. 

To modify or delete the favourite position (my), see the section entitled "Modifying settings".

6.1.3. Up and Down buttons

•  On  a Telis  MOD/VAR  type  local  control,  briefly  pressing 

the Up or Down button raises or lowers the E.V.B. fully.
The thumbwheel is used to angle the slats.

•  On a standard Telis type local control, 2 modes are 

available: EU mode and US mode. 
The J4 RTS motor is factory set to operate in US mode

In US mode, briefly pressing the Up or Down button raises 

or lowers the E.V.B. fully. pressing and holding the Up or 

Down button angles the slats.

In EU mode, pressing and holding the Up or Down button 

raises or lowers the E.V.B. fully. briefly pressing the Up or 

Down button angles the slats.

Summary of Contents for J4 RTS























Reviews: