Only manual move commands are executed.
press
+
briefly with the
➜
(OFF)
is displayed.
press
-
briefly with the
➜
time is displayed.
+
-
+
-
The shutters open and close at approximately sunrise and sunset.
By inputting a differential time, opening and/or closing can be moved independently in relation to the times of sunrise and sunset
by up to +/- 1h 59 min.
By inputting individual blocking times, it particularly prevents very early or late move commands in the summer months.
Example:
With +1h
differential time
for UP, the shutters open 1 hour after sunrise. With -1h they open 1 hour before sunrise.
The sun rises shortly after 05:00 in June. However, you want your roller shutters to open at 07:00 at the earliest. Input the blocking time 07:00 for UP.
Sunset occurs at approx. 21:40. If you want your roller shutters to close at 21:00 at the latest, then input the
blocking time
21:00 for DOWN.
The factory setting for the UP blocking time is 06:00, and 20:00 for DOWN. If you want these blocking times to have no effect on the opening or closing, and
the shutters to be controlled at the time of sunrise and sunset, then you can set the UP
blocking time
to 05:00 and the DOWN
blocking time
to 22:00.
Cosmic 2 always opens the roller shutters at the times set in the
weekly program
and close them at the times from
Cosmic 1
.
The differential time and the blocking time that were set in Cosmic 1 are taken into account. No changes can be made to the swit-
ching times in Cosmic 2.
Set differential time
1.
Hold
down until
(COS 1)
is displayed.
2.
Press
briefly
➜
time blinks and the next switching command is dis-
played.
3.
Press
briefly
➜
differential time UP blinks.
4.
Change differential time “UP” with
5.
Press
briefly
➜
differential time “DOWN” blinks.
6.
Change differential time “DOWN” with
7.
Press
briefly (store)
➜
differential times are stored, time display.
+
-
+
-
Cosmic 1 (COS 1)
OFF mode
Cosmic 2 (COS 2)
Set blocking time
1.
Hold
down until
(COS 1)
is displayed.
2.
Press
briefly
➜
time blinks and the next switching command is dis-
played.
3.
Press twice
briefly
➜
blocking time “UP” blinks.
4.
Change blocking time “UP” with
5.
Press twice
briefly
➜
blocking time “DOWN” blinks.
6.
Change blocking time “DOWN” with
7.
Press
briefly (store)
➜
blocking times are stored, time display.
+
-
+
-
®
Using:
4
By pressing briefly the
or
push buttons, the output is activated to control the BUS line (“UP” or “DOWN” controls).
By pressing briefly the
push button, the both “UP” and “DOWN” outputs are activated to control the BUS line (“STOP” control).
A
MOVE / STOP command :
