The
CENTRALIS receiver RTS
is a radio receiver for awnings compatible with all the
RTS controls
and the
INIS RT.
Commands are transmitted by radio (frequency 433.42 MHz).
With an
INIS RT
, the functioning of the
CENTRALIS receiver RTS
is a trip switch type :
▲
, stop,
▼
, stop,…
®
❏
Mains supply : 220-240 V~ 50/60 Hz
❏
Protection index: IP 44
❏
Operating temperature: -20°C to +50°C
❏
Class II product once installed
❏
Normally polluted environment
inteo
CENTRALIS receiver RTS 2
INSTALLATION
guide
Ref.5003509
Characteristics:
1
Installation:
2
150 mm
150 mm
Before connecting the unit, you must read the instructions carefully.
N N
L
▲ ▼
40 mm
Programming
button
LED
Mounting of the CENTRALIS receiver RTS 2 :
A
Recommendations :
❏
Install the CENTRALIS receiver RTS with the cables entry pointing down-
wards to avoid water infiltration.
❏
Do no install the CENTRALIS receiver RTS against a metallic part
(it could affect the radio transmission).
❏
minimum distance between the receiver and the floor :
1,5 m
.
❏
minimum distance between the receiver and the roof :
30 cm
.
❏
minimum distance between the receiver and the transmitter :
30 cm
.
❏
minimum distance between two receivers :
20 cm
.
Built-in manual
security control
Hereby, SOMFY, declares that this equipment is in
compliance with the essential requirements and
other relevant provisions of Directive 1999/5/EC.
A Declaration of Conformity is available at the web
address
www.somfy.com Heading CE
133 mm
