5
Copyright © 2015 Somfy SAS. All rights reserved - V1 - 02/2015
2. INSTALLATION
Instructions which
must
be followed by the drive and home automation
professional installing the Roll Up 28 WT drive.
Never drop, knock, drill or submerge the drive.
Install a separate control point for each drive.
1
1
1
2.1. INSTALLATION
2.1.1. Preparing the drive
Check that the inner diameter of the tube is 26,6 mm or greater.
1) Fit the accessories required to
integrate the drive in the roller tube:
(LWKHU¿WWKHGULYHZKHHO
a
on the
drive.
)LWWKHFURZQ
b
and the drive wheel
c
on the drive.
2) Measure the length (L) between
the inner edge of the drive head and
the rim of the drive wheel.
2.1.2. Tube preparation
1) Cut the roller tube to the required length, depending on the motorised
product.
2) Deburr the roller tube and remove the swarf.
3) For roller tubes which are smooth inside, cut a notch with the following
measurements:
d
: 4 mm
e
: 7 mm
1
L
1
2
c
b
a
1
2
3
d
e
Summary of Contents for HOME MOTION Roll Up 28 WT
Page 2: ......