1.
Click on “Group Motor Address.”
2.
Enter the Motor Address just assigned. Click on “All Commands”.
3.
Click on “Calculate”. All the command strings will be filled in automatically.
4.
Only the following commands can be used with the Glydea Motor:
UP, STOP and DOWN
Somfy’s command calculator is located on-line at:
http://www.somfy.us/Apps/SDNSoftware/ILT%20Command%20Calc.exe
3
GET COMMANDS
4
CONNECTION DIAGRAM
MOTOR HEAD
RJ45
MODULAR
PLUG
Power Plug
120v AC
CAT5 CABLE
SDN BUS
CAT5 CABLE
RS485
24V DC
Bus Power Supply
RS485 Interface
1870127
SOMFY SYSTEMS, INC. 9/11
Ref. No.: 2500129
C
SOMFY SYSTEMS, INC.
121 Herrod Boulevard
Dayton, NJ 08810
SOMFY CANADA
6315 Shawson Drive, Unit #1
Mississauga, Ontario L5T1J2
SOMFY SYSTEMS, INC. reserves the right to change,
update or improve this document without prior notice.
5
RESET TO DEFAULT
To change the Motor Address back to the default (ABCDEF), press and hold the reset button until the LED turns on.
LED
Reset
Button
