Safety instructions
EN
8
Copyright © 2016 SOMFY ACTIVITES SA. All rights reserved.
Solution:
Eliminate any gap ≥ 8 mm between the pinion and the rack
Solution:
Check that the sill and guide rail
are visible, greater than 5 mm and
highlighted or rounded.
If this is not the case, mark
the raised sections that are not
immediately visible
Solution:
Eliminate all sharp edges on the
guide rails
Eliminate any gap ≥ 8 mm between
the rails and the bearings
e
Pillar
Pillar
Rail
Rail
Gate
e
e
ZONE 5
Risk of movement force and crushing at the pinion/rack connection
ZONE 6
Risk of tripping on the guide rail on the ground
ZONE 4
Risk of trapping and crushing
between the roller rails and
bearings
e < 8 mm
h > 5 mm
