background image

EOLIS RECEIVER

Inteo Wind - Remote

Installation and Operating Instructions

DESCRIPTION

INSTALLATION PROCEDURES

1.

  The Eolis Receiver should be mounted as close to the motor

     as possible.  If mounted outside, ensure that the connections
     are facing down to avoid rain seepage.  Avoid mounting the
     control against any metallic surface, as this may affect the
     radio reception.

2.

  Connect high and low voltage wires according to the wiring

     diagram on the next page.  It is recommended that the low
     voltage wiring is done first, for easier access to the terminals. 
     Make sure to use included watertight strain relief fittings to
     maintain the weatherproofing of the enclosure. 

3.

  The wind sensor should be placed close to the awning or

     shading system to make sure the wind speed is measured at
     the product.  Guard against installing the wind sensor too
     close to an obstruction such as a chimney, gutter or the
     window treatment itself, which could block the wind and cause
     erroneous sensor readings. The sensor should not be more
     than 100 feet from the control.  Remove the back cover of the
     sensor and connect the two-wire cable (included) from the
     terminals on the sensor to the terminals on the control.  Refer
     to the diagram on the next page. 

4.

  When using a low voltage switch, it should be located no more

     than 100 feet from the Eolis Receiver.

The Somfy Eolis Receiver is a single motor control designed for 
residential use.  It includes an integrated radio receiver, wind 
sensor and low voltage switch inputs.  Wind speed is 
continuously monitored, triggering the control to retract 
awnings or shutters automatically as needed.  Using the Telis 
Transmitters, it is possible to operate the controls individually or 
in groups.  Two user-defined intermediate positions can be 
programmed.  This new control is packaged in a weatherproof 
enclosure and includes watertight strain-relief fittings for wires 
entering the box.  

Part No: 1816073

x

CAT. NO:

  

2500022

SOMFY SYSTEMS, INC.

47 Commerce Drive 
Cranbury, NJ 08512

SOMFY CANADA

6315 Shawson Drive, Unit #1
Mississauga, Ontario L5T1J2

SOMFY MEXICO S.A. De C.V.

Temazcal 19-B, La Loma
Tlalnepantla, Edo de Mex.
Mexico 54130

SOMFY SYSTEMS, INC.    8/07

C

SOMFY SYSTEMS, INC. reserves the right to change, 
update or improve this document without prior notice.

x

Reviews: