For detailed steps on programming, please refer to the pocket
programming guide at
www.somfypro.com/pocket-programming-guide
WARNING: Burn hazard. To avoid the risk of fire, explosion, or burns, DO NOT recharge, disassemble, crush, puncture, or
incinerate the battery. Please recycle battery appropriately.
1.
Remove the Somfy wall plate to access the keypad module.
2.
Slide the battery door off and remove the battery from the holder.
3.
Remove the existing battery and replace with a new CR 2430 battery, positive (+) side up. Slide the battery door back into the
keypad module and reinstall it with the wall plate.
The keypad can be surface-mounted with the following steps:
1.
Drill two 3/16” holes using the mounting frame as a guide.
2.
Install the frame using the anchors and screws provided.
3.
Push the keypad module until you hear a click.
4.
Attach the Somfy wall plate on to the keypad.
© Somfy Systems, Inc. 9/2022
PROGRAMMING
BATTERY REPLACEMENT
INSTALLATION
25001025
Programming Button
SOMFY SYSTEMS INC
121 Herrod Blvd.
Dayton, NJ 08810
Phone: (800) 22-SOMFY
NJ: (609) 395-1300
Fax: (609) 495-8118
somfypro.com
Florida
1200 SW 35th Ave.
Boynton Beach, FL 33426
Phone: (877) 227-6639
Fax: (561) 995-7502
California
15301 Barranca Parkway
Irvine, CA 92618-2201
Phone: (877) 727-6639
Fax: (949) 727-3775
SOMFY ULC
SOMFY Canada Division
6411 Edwards Blvd
Mississauga, ON L5T 2P7
CN: (905) 564-6446
Fax: (905) 238-1491
somfypro.ca
FCC/IC Information
This device complies with part 15 of the FCC Rules and Industry Canada
license-exempt RSS standard(s). Operation is subject to the following
two conditions:
(1) This device may not cause interference, and
(2) this device must accept any interference, including interference that
may cause undesired operation.
