EN
Copyright © 2016 Somfy SAS. All rights reserved.
10
7 USING THE VIDEOPHONE
When a visitor presses the call button on the external module, the monitor rings and the image of the visitor is displayed on
the monitor(s) depending on the configuration of the installation.
7.1 Responding to a visitor
[1].
Press button
, the LED located behind the pictogram lights up and communication with the external module is
activated .
[2].
You can communicate with your visitor.
Note: you can communicate with your visitor for a maximum of 1 or 2 minutes depending on the configuration of the external
module.
[3].
Press the button
again, the LED located behind the pictogram goes out and communication with the external
module is
terminated.
7.2 Opening the gate and/or unlocking the electric latch (or lock)
Depending on the installation, this function can be activated by the button
and/or the button
.
While communicating
with a visitor
While there is no communica-
tion with a visitor
R0
[a]
or
[b]
or
[c]
Press the
button.
-
The external module
relay is activated and the
monitor screen switches
off.
[1].
Press the
button,
the screen is switched on
and displays the video
from the external module
(ID = 1).
Note: if you press the
button twice, the video from the
external module configured with
ID = 2 is displayed.
[2].
Press the
button
to operate the gate (to
close it for example) or
the electric latch/lock; the
screen is switched off.
9020031
R1
[a]
or
[b]
or
[c]
Press the
or
button.
-
Relay R1 is activated.
Press the
button.
-
Relay R1 is activated.
Note: pressing the
button
activates the “do not disturb”
function.
R2
Press the
button
twice [*].
-
Relay R2 is activated.
[*] if your installation includes several relay modules ref. 9020031, the number of times you press the
button determines
the relay to be activated (use the guide at the beginning of this document to see the corresponding functions).
7.3 Talking via two monitors
This function is only available if your installation has two monitors configured to accept this function. Communication between
two monitors is only available in audio mode.
[1].
On the 1st monitor, press the
button the number of times corresponding to the address or the extension of the
monitor to be called.
-
The 2nd monitor rings.
[2].
On the 2nd monitor, press the
button.
-
Audio communication is open between the two monitors.
[3].
To terminate the communication, press the
button on one of the two monitors.
Summary of Contents for 9020031
Page 115: ......