Weather Station KNX
Black
KNX–
orange
AC/DC 24 V ~/+
brown
AC/DC 24 V ~/-
The sensor head is translucent. Therefore, do not stick or write on the sensor head.
Aligning the device
Figure 9: Orienting the weather station
￭
Align the sensor head in the appropriate direction or - depending on the detailed on-site
circumstances - according to the alignment of the facade (Figure 9).
4.2 Commissioning
Commissioning the device
Figure 10: Position of the programming LED and reed contact
￭
Switch on the bus voltage.
￭
Switch on supply voltage.
￭
Hold the supplied programming magnet by the integrated reed contact (12).
The programming LED (13) indicates the programming state blue.
￭
Assign physical addresses and load application software into the device.
￭
Note the physical address on adhesive labels on the underside.
The device is ready for operation.
5
Technical data
Supply
Rated voltage
AC 24 V SELV (± 10%)
Rated voltage
DC 21 ... 32 V SELV
Current consumption
100 ... 400 mA (dependent on the weather)
Protection class
III
Connecting cable
5 / 8
82590128
16.02.2021
5158881A