SETTING FAVORITE POSITION...cont’d
my
3.
Press and hold the center ( )
button for 2 seconds to record
the position.
4.
To reach your favorite position,
press the center ( ) button
whenever the shade is already
stopped. The shade or awning
will automatically go to that
position.
my
ADDING A NEW REMOTE
2.
Using a paper clip or pen,
press and hold the programming
button on the back of the remote
until your window shade jogs
up then down.
3.
Get the new remote and select
the new channel.
4.
Using a paper clip or pen, press
and hold the programming button
on the back. The window shade
will jog. This remote will now
operate your shade or awning.
1.
With your current remote, select
the shade to operate by pressing
the Channel Select Button. The
small LED lights will light up each
time the Channel Select Button
is pressed to show what channel
is being operated.
BACK
BACK
TI N
B Y
my
my
Channel
Selector
my
my
BACK
BACK
© SOMFY SYSTEMS, INC. 7/2009
Programming
Button
Programming
Button
REPLACING THE BATTERY
1.
Using a small screwdriver loosen the
screws on the reverse side of the remote
control and remove the back cover.
2.
Replace the battery with one
2430 Lithium 3V battery.
NOTE: IN CASE OF A LOST TRANSMITTER, PROFESSIONAL
PROGRAMMING ASSISTANCE IS REQUIRED. PLEASE CONTACT
SOMFY AT [email protected] OR YOUR LOCAL DEALER
AT www.somfysystems.com/en-us/home/where-to-buy.html
dealerlocator.
