Electrostatic Near-Field Loudspeaker
11
www.sombetzki-elektrostaten.de
6.2 Settings
Height adjustment
The optimum listening position relative to the height is located in the middle of the
transducer. The loudspeaker head is height-adjustable so that you can adjust your
center position on different seating areas. You will find a hand wheel on the pipe
side of the head. Rotate to the left to loosen it. Now you can touch the head with
both hands and move up or down and then tighten it by turning the wheel to the
right. The displacement range is approx. 20 cm. (See figure 5).
Figure 5: Hand wheel on head
Horizontal angle
An additional handwheel is located on the electronic housing (see figure 6). After
you have loosened it (turn to the left), the loudspeaker head can be rotated about
90° around the tube axis. This allows the transducer to be angled to your ears
(mentioned in point 4). Try different angles. The benchmark is your personal
"taste". However, it should be noted that both "heads" should be at approximately
the same angle to you. For this purpose, read off the angle at the lower end of the
pipe and set the same value on the second
ESL Home
(see figure 7).
