PIPE
USER MANUAL
Maximum input AC voltage when used with external audio is 2.5V p-p. Higher voltage will
create an overload in the input circuit and the signal will be distorted. Input impedance —
250 kOhm.
9
М4 thread for connecting a neck strap.
The maximum length of the threaded portion
of the screw cannot be more than 8 mm! A longer screw will damage the PIPE circuit board!
10
Two M4 threads for placing the PIPE on a stand, holder or certain surface.
The
distance between the center of the holes is 25 mm. The maximum length of the threaded
portion of the screw cannot be more than 8 mm! Longer screws will damage the PIPE
circuit board!
Inner light. The PIPE shines with a mystical red light from the openings on the front panel.
This light responds to input peaks with increased brightness. You can change the brightness
of the light and signal sensitivity with a special trimming resistor inside the PIPE. To access
it, open the back cover. The resistor is located close to the LEDs.
Summary of Contents for PIPE
Page 1: ...USER MANUAL ...
