COSMOS
USER MANUAL
BUTTONS
HPF
High-pass cutoff filter (high frequencies pass, low frequencies are cut).
It has three fixed cutoff frequency settings. To change the frequency, hold down the
HPF
button and press the
REVERSE (SELECT)
button.
The filter status is indicated by two LEDs above it:
— the filter is off.
— minimum cutoff frequency (least filter effect).
— medium cutoff frequency (medium filter effect).
— maximum cutoff frequency (the greatest influence of the filter).
LPF
Low-pass cutoff filter (low frequencies pass, high frequencies are cut).
It has three fixed cutoff frequency settings. To change the frequency, hold down the
LPF
button and press the
REVERSE (SELECT)
button.
The filter status is indicated by two LEDs above it
— the filter is off.
— the minimum cutoff frequency (the greatest influence of the filter).
— medium cutoff frequency (middle filter effect).
— maximum cutoff frequency (least filter effect).
ERASE
Erases sounds recorded in delay lines. To instantly clear all memory, hold down the
ERASE
button and press the
RECORD (ERASE ALL)
button.
REVERSE
Switches on reverse playback.
RECORD
Enables writing to the device memory. If this button is not pressed, the sounds recorded
in the device's memory are played back and can be modified by the built-in effects, but
new incoming sounds are not recorded to the memory. In this case, the incoming sounds
are still mixed with the recorded sounds and fed to the output of the device. Record Off
is good for soloing over recorded sounds, which are used as background in this case.
The record function has four modes of operation. To switch modes, hold down the
RECORD
button and press the
REVERSE (SELECT)
button.