Soma Networks SOMAport, Setup Manual

Page: 47 / 80

47
Installing the SOMAport
Changing network settings in Windows 2000
Change your computer’s network settings if you could not get an Internet
connection after connecting your computer to the SOMAport.
The procedure you follow depends on whether or not your PC has previously
been set up for a dial-up Internet connection. Choose one of the following
procedures:
„
If the PC has not previously been set up for a dial-up connection, you can
use the Internet Connection Wizard. See
“To run the Internet Connection
Wizard in Windows 2000” below.
„ If the PC has been previously set up for a dial-up connection, the Internet
Connection Wizard will not work and you must manually change the
network settings. See
“To change network settings in Windows 2000” on
page 48 .
To run the Internet Connection Wizard in Windows 2000
1
Choose Start
→
Programs
→
Accessories
→
Communications
→
Internet
Connection Wizard.
The Welcome to the Internet Connection Wizard window opens.
2
Enable the I want to set up my Internet connection manually, or I want to
connect through a local area network (LAN) radio button and click Next .
The Setting up your Internet Connection window opens.
3
Enable the I connect through a local area network (LAN) radio button and
click Next .
The Local area network Internet Configuration window opens.
4
Make sure all checkboxes are disabled and click Next .
The Set up Your Internet Mail Account window opens.
5
Enable the No radio button and click Next .
The Completing the Internet Connection Wizard window opens.
6
Click Finish .
7
Restart your computer.
N O T E :
Do not skip this step.