29
Note:
- Once the programmes are set, remember to enable them on the
“Habilitações” (Activation) menu.
- There can only be one enabled profile in the Timer, either weekly or daily
(they do not operate simultaneously).
- When the Timer is enabled, you can check the following message in the
display: “chrono prog”.
9.1.5.
Sleep (this menu is displayed only while the unit is operating)
The “Sleep” menu allows you to setup the time you want the unit to turn off.
Press “set”. The display starts to flash. Select the desired time using the “-” and “+”
keys. After choosing the time, press “ok” to confirm. Press “esc” to return to the menu
and “+” to go to the info menu.
ON
OFF
OF
F
+
OK
OFF
MENU
OFF
MODE
OFF
ESC
OFF
-
MAN
AUT
OFF
esc
OFF
Set
SLEEP
ON
OFF
OF
F
+
OK
OFF
MENU
OFF
MODE
OFF
ESC
OFF
-
MAN
AUT
OFF
esc
22:00
Set
SLEEP
Summary of Contents for Hidro 12
