Easy
Start
10 Setting Up Your Router Via The Wizard Utility
10.1 For Windows 2000/ XP Users ONLY
This chapter is only for Windows User, please use the Router Utility
Installation CD provided to setup your SAR-600 Router Utility. If you are using
an alternative Operating System then please refer to the Web Graphical User
Interface for router setup.
10.2 Installing the CD Wizard Self-Installation Utility.
i
Connect a network cable from the LAN port of your PC to one of the LAN ports on the rear of
your router. Next insert the Setup Wizard Self-Installation CD into the CD-ROM drive. The utility
will auto-run and the screen as shown below will appear. (Note: If it does not auto-run, access to
the CD-ROM drive and execute
CDWizard.exe
).
ii
Click on “Self-Install Wizard” and then Next on the next screen to continue.
Solwise Ltd
Easy Start
Page 22 of 33
www.solwise.co.uk
