background image

4

VeseNET,

www.vesenet.co.uk

1 HomePlug Powerline

HomePlug powerline is an excellent solution that can be used to extend your network. In the home or small office

building, use HomePlug Ethernet Bridge Adapters to link multiple locations without the need to run Ethernet cable.

Combined with a broadband DSL/Cable connection, every room with electrical power outlets will have easy access

to high-speed Internet connection.

1.1 Introduction

The PLA-AV-3E-PIGGY6 (

Piggy6

) allows you to connect up to 3 devices which have Ethernet ports to a Powerline

network. At the same time, the 6 outlet extension provides 6 filtered power plugs allowing multiple devices to plug

in for power and filters them so they do not affect the performance of the built-in HomePlug 200M 3 Ethernet ports.

In operation, the

Piggy6

is completely transparent, and simply passes data between the Ethernet port and the

Powerline network.  The Powerline data transfer rate can be reached up to 200Mbps. Any device or computer

may be connected to the

Piggy6

Ethernet port including Windows Vista, W indows 2000, W indows XP, Linux, Mac

OS X or any other operating system with network support.

1.2 Usage Diagram

1.3 Physical Details

Recessed
Reset Button

Security Button

Power LED

1 Thru 3 Ethernet Ports LEDs

HomePlug LED

Summary of Contents for PLA-AV-3E-PIGGY6











Reviews: