PL-200AV-PEV_User Manual
12
Step 3
Enter the password. Click
OK
to verify the password. The password is
case-sensitive.
A confirmation box appears if the password is entered correctly. If a device is not
found, a message appears, providing suggestions to solve the common problems.
This process might take a few seconds to get completed.
Add
This button is used to add a remote device to the existing network by entering the
device password of the device. A dialog box appears. See
Figure 12
. You can
enter a device name and the password.
If the device is found and the password is entered correctly, a confirmation box
appears. If a device is not found, a message appears, providing suggestions to
solve the common problems.
Figure 12 Add the remote device
Note:
The device must be in the powerline (plugged in), so that you can confirm the
password and add the device to the network. If the device is not located, a
warning message appears.
