Solwise Ltd,
www.solwise.co.uk
13.
When the unit has rebooted goto TCP/IP Settings/LAN Interface
14.
Now set DHCP to Disabled. Also now change the IP Address to a value
suitable for your network. So if your network address range is normally
192.168.0.x then set the M18P1 with an unused address on that range: Maybe
192.168.0.230? What ever you change it to just ensure it’s suitable for your
network and remember what it is!
15.
Now click on Apply Changes
16.
Configuration for AP mode is now complete. Now you can unplug your PC
from the M18P1 and then connect both devices to your network.
