Solwise DMP1120w, User Manual

Page: 22 / 32

- 21 -
Transition
6.4 Device Setup
TV Type
There are three available settings: Mutisync NTSC PAL
TV Display
There are three available settings: 4:3 Full Screen 4:3 Letter Box 16:9 (HDTV)
Video Output
There are two available settings: YCbCr SCART-RGB
SPDIF Output
There are three available settings: Off SPDIF/RAW SPDIF/PCM
SPDIF/RAW:
Set to this selection will output the raw bit stream signal of Dolby
®
Digital or DTS from
the optical jack. In order to enjoy Dolby
®
Digital DTS media files, this unit’s digital output jack
must be connected to the digital-input jack of a Dolby
®
Digital or DTS compatible receiver or
processor.
SPDIF/PCM:
PCM stands for Pulse Code Modulation and is digital audio. Connecting this unit to an
amplifier with a built-in D/A converter can play the same digital audio format media files.
Additionally, 2-channel analogue audio will output from the audio output jacks of amplifier.
Screen Saver
There are four available settings: Never 3 Minutes 5 Minutes 15 Minutes
Restore Factory Defaults
When you select this item and press OK key, then all the initial settings will be restored to the
factory default settings.
7. Content Navigation Modes
Once a content source is selected, the directory format presented is determined by that
Exit Setup
Playback Options
Select Network
Network Setup
Device Setup
Device Status
Setup Main Menu
Device Setup
Back
TV Type NTSC
TV Display 16:9(HDTV)
Video Output SCART-RGB
SPDIF Output Off
Screen Save 3 seconds
Font Size Normal
Restore Factory Defaults